Skip to content

Terms & Conditions

Paul Russell & Company

Paul Russell & Company - Terms of Use

Access

By accessing this website, you are agreeing to be bound by these website Terms of Use, applicable laws (including, but not limited to, copyright laws) and regulations and their compliance.  If you disagree with any of the stated terms and conditions of the Terms of Use, please do not access or use this website and leave it immediately.

Content

This website describes information about Paul Russell & Company (the “Company”), its management and the services offered by the Company (collectively, the “Content”).  All Content on the website is owned by the Company and is protected by U.S. copyright law, and all trademarks, service marks and trade names are proprietary to the Company unless otherwise indicated.

Usage

You may download one copy of any or all of the Content in this website for viewing and printing for your personal use.  Except as stated above, you may not download, upload, display, copy, reproduce, reprint, modify or distribute any of the Content without the express prior written consent of the Company.

Subject to the terms and conditions of these Terms of Use, the Company hereby grants you a revocable, non-transferable, non-exclusive, personal and limited license to use and view Content in a manner consistent with all applicable laws and regulations.

Disclaimer of Warranties

The Company makes no representation or warranty that this website will be error free or accessible without interruption.  Although the Company periodically makes updates to the website, the information on the website might include inaccuracies and out-of-date information; use of such information is at the website visitor’s own risk.  All Content is provided “as is” without warranty of any kind.  Some of the information on this website may contain projections or other forward-looking statements regarding future events or the future financial performance of the Company.  You are cautioned that these statements are only predictions and that actual events or results may differ materially.

THE COMPANY HEREBY DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, STATUTORY, ORAL OR WRITTEN, INCLUDING, WITHOUT LIMITATION, ANY AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY, REASONABLE CARE, ACCURACY, FITNESS FOR A PARTICULAR PURPOSE, AND ANY AND ALL WARRANTIES OF TITLE, ACCURACY OF DATE AND/OR NON-INFRINGEMENT, unless otherwise prohibited by law. 

Limitation of Liability

IN NO EVENT WILL THE COMPANY ITS EMPLOYEES, OFFICERS, REPRESENTATIVES, SERVICE PROVIDERS, SUPPLIERS, LICENSORS, AND AGENTS BE LIABLE TO YOU FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, INCIDENTAL OR SPECIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOSS OF USE, LOSS OF PROFITS, OR LOSS OF DATA, WHETHER IN AN ACTION IN CONTRACT, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), OR OTHERWISE, ARISING OUT OF OR IN ANY WAY CONNECTED WITH (i) THE USE OR INABILITY TO USE THE WEBSITE OR THE CONTENT, MATERIALS OR INFORMATION PROVIDED ON THE WEBSITE, OR (ii) ANY CLAIM ATTRIBUTABLE TO ERRORS, OMISSIONS, OR OTHER INACCURACIES IN THE WEBSITE OR THE CONTENT, MATERIALS OR INFORMATION PROVIDED ON THE WEBSITE.

Indemnification

You agree to indemnify, hold harmless and, at our option, defend the Company (including our affiliates, officers, directors, employees, agents, licensors, suppliers, and any third-party information providers, from and against all damages, claims, demands, liabilities, losses costs and expenses, including reasonable attorney’s fees, in connection with or arising out of violation of these Terms of Use, your use of the website or the Content. These obligations will survive any termination of your use of the website. 

Governing Law and Jurisdiction

By visiting or using the website, you agree that the laws of the State of Massachusetts, U.S.A., without regard to principles of conflicts of law, will govern the Company’s Privacy Policy and these Terms of Use and any dispute of any sort that might arise between you and the Company. You agree that any action at law or in equity that arises out of or relates to any use of the website will be filed solely and exclusively in the state or federal courts located in Massachusetts, and you hereby consent and submit to the personal jurisdiction and venue of such courts for the purposes of litigating any such action.

Entire Agreement 

These Terms of Use (as amended from time to time), including any policies incorporated herein (e.g., Privacy Policy) constitute the entire agreement between you and the Company regarding the website and your use of the website or the Content, and supersede any prior agreement or understanding, arrangements, undertaking or proposal, written or oral, between you and the Company in relation to such matters.

The Mercedes-Benz factories sustained massive damage from Allied bombing during World War II. Utility vehicles were the first post-war product, and helped the company toward recovery. But something more spectacular needed to be done to attract the world’s interest. In 1951, it was decided to re-enter the racing circuit. In order to do so with the least financial strain, a sports car was developed using the existing 300 engine. Because of the relatively heavy weight of that engine and drivetrain, an unusually light body needed to be constructed. And so, the tubular steel framed, aluminum bodied 300SL (Sport Light) was born. Approximately fifteen of these race cars were made, winning many events and earning the world sports car championship.

In 1952, the 300SL caught the interest of racing fans in the United States. New Yorker Max Hoffman was one such enthusiast, who used his car dealership to bring many of the European makes into this country. One might even say that he is responsible for the creation of the 300SL, as his order for 1,000 cars convinced the Mercedes-Benz officials to go ahead with the production of a street car based upon the 300SL racing sports car. The prototype 300SL was shown at the International Motor Sports Show in New York City in February 1954.

The first production car with a fuel-injected gasoline engine, the 300SL was one of the most reliable sports cars of the ’50s and ’60s. The proven 300 engine was tilted to the left to accommodate a lower hood line. The body style was designated Sport Leicht (Light) due to its aluminum doors, hood, decklid, rocker panels and belly pans, though the main body shell was constructed from steel. Unusual for the period, 300SLs came equipped with dependable heat, defrosters, and wiper motors.

Ultimately, three different versions of the 300SL were offered. The 300SL Coupe was produced from August 1954 to May 1957, during which time twenty-nine all-aluminum bodied cars were made as well. Production of the Roadster version was between February 1957 and February 1963. Whichever style is your preference, they are now highly valued for their pure driving pleasure in the Mille Miglia, Colorado Grand, and other vintage events.

Factory photos courtesy of Mercedes-Benz Archives.

Pininfarina or Pinin Farina? In 1930, Battista ‘Pinin’ Farina founded Carrozzeria Pinin Farina. This company designed and built car bodies for a number of manufacturers, including Alfa Romeo, Hispano Suiza, Lancia, Fiat, and, most notably, Ferrari. Battista is quoted as saying “The interrelation between the body of a beautiful woman and that of a Farina-designed car is that both have simplicity and harmony of line, so that when they are old one can still see how beautiful they were when they were young.”

In conjunction with Battista’s retirement in 1961, the President of the Italian Republic authorized the family name to be changed to Pininfarina “in consideration of his achievements in social and industrial activities”. As a result, the correct usage of the family name as Pininfarina or Pinin Farina depends upon the year it was used.

The Mercedes-Benz factories sustained massive damage from Allied bombing during World War II. Utility vehicles were the first post-war product, and helped the company toward recovery. But something more spectacular needed to be done to attract the world’s interest. In 1951, it was decided to re-enter the racing circuit. In order to do so with the least financial strain, a sports car was developed using the existing 300 engine. Because of the relatively heavy weight of that engine and drivetrain, an unusually light body needed to be constructed. And so, the tubular steel framed, aluminum bodied 300SL (Sport Light) was born. Approximately fifteen of these race cars were made, winning many events and earning the world sports car championship.

In 1952, the 300SL caught the interest of racing fans in the United States. New Yorker Max Hoffman was one such enthusiast, who used his car dealership to bring many of the European makes into this country. One might even say that he is responsible for the creation of the 300SL, as his order for 1,000 cars convinced the Mercedes-Benz officials to go ahead with the production of a street car based upon the 300SL racing sports car. The prototype 300SL was shown at the International Motor Sports Show in New York City in February 1954.

The first production car with a fuel-injected gasoline engine, the 300SL was one of the most reliable sports cars of the ’50s and ’60s. The proven 300 engine was tilted to the left to accommodate a lower hood line. The body style was designated Sport Leicht (Light) due to its aluminum doors, hood, decklid, rocker panels and belly pans, though the main body shell was constructed from steel. Unusual for the period, 300SLs came equipped with dependable heat, defrosters, and wiper motors.

Ultimately, three different versions of the 300SL were offered. The 300SL Coupe was produced from August 1954 to May 1957, during which time twenty-nine all-aluminum bodied cars were made as well. Production of the Roadster version was between February 1957 and February 1963. Whichever style is your preference, they are now highly valued for their pure driving pleasure in the Mille Miglia, Colorado Grand, and other vintage events.

Factory photos courtesy of Mercedes-Benz Archives.

In March of 1926, Felice Bianchi Anderloni founded Carrozzeria Touring in Milan, Italy. A “gentleman” race driver and coachbuilder for 1930s Isotta-Fraschini and Alfa Romeo, Felice was well respected for creating beautiful, aerodynamic designs. He developed the patented “superlight” Superleggera construction method, a marvel of metal tube frames welded to a solid chassis, then skinned with aluminum body panels.

When Felice died suddenly in 1948 it was up to his son Carlo Felice, known as “Cici”, to save the business. Cici did so in no uncertain terms, when he presented his 1/10-scale model of the distinctive Barchetta to prospective client Enzo Ferrari. Enzo accepted the “little boat” design as presented. The superleggera concept became so closely associated with Touring that it was incorporated into the name of the company, becoming Touring Superleggera Milano in the 1950s.

Pictured: Cici Anderloni proudly displays the original Barchetta model to Paul Russell. Lake Como, 1998.

Scraping is done with a long, wood-handled chisel. First, the surface is cleaned, made level, and marked in pencil with a grid pattern. The chisel is held with both hands, with further pressure applied by the shoulder pushing against the wooden handle. As the blade of the chisel digs into the aluminum surface, the chisel is pushed and ‘flicked’ with a rotating motion. Once this is repeatedly accomplished in one direction, the part is turned 90 degrees and the entire process repeated again. Finally, the part is hand-sanded with a very fine-grade paper to remove the aluminum shards and burrs.

For many years, conventional wisdom had it that there were 3 Atlantics built. Fortunately enthusiasts like L.G. Matthews and historians like Pierre-Yves Laugier continue to study all things Bugatti, and new information and analysis becomes known and shared. The revival of the Bugatti Marque in the ownership of the Volkswagen Group has facilitated a reorganization of the company historic archives, in the hands of the esteemed Julius Kruta.

It is now acknowledged that there was a prototype (pictured here) named the Aerolithe built on a modified T57 chassis and later disassembled to form the basis for the first production car, now on the S chassis number 57374. This first car was labeled the Aero, and resides at the Mullin Automotive Museum.

Chassis 57473 was the second car produced and the first to be called the Atlantic. There were two more Atlantics made, one of which has not been seen since it disappeared in Belgium in the 1940s. The last of the Atlantics produced is chassis number 57591.

Professor Ignacio Barraquer who owned the Autobahn-Kurier for more than 60 years, was not just any eye doctor, but possibly the most famous ophthalmologist who ever lived. He developed procedures and surgical instruments that are standard to this day, mostly associated with cataract surgery, and many named after him. His father was Professor of Ophthalmology at the School of Medicine in Barcelona, Spain, a position Ignacio was appointed to following his father’s retirement. Ignacio’s son, José, developed the keratomileusis, or LASIK operation, today a common surgical procedure.

Born into an Italian banking family, Count Carlo Felice Trossi was an amateur inventor and a noted motor sportsman of the 1930s. Known as ‘Didi’ to his friends, he enjoyed racing boats and airplanes in addition to his pursuits in the field of engineering. As an early financial backer of Enzo Ferrari, he become President of Scuderia Ferrari in 1932 while continuing to be a primary driver for the team.

Reproduced here is a picture dated 1932, and supplied by his family, of his SSK in front of Castello di Gaglianico. The records of the Automobile Club of Italy show that Count Trossi sold and bought back this singular car several times from 1931 until his death in 1949.

In March of 1926, Felice Bianchi Anderloni founded Carrozzeria Touring in Milan, Italy. A “gentleman” race driver and coachbuilder for 1930s Isotta-Fraschini and Alfa Romeo, Felice was well respected for creating beautiful, aerodynamic designs. He developed the patented “superlight” Superleggera construction method, a marvel of metal tube frames welded to a solid chassis, then skinned with aluminum body panels.

When Felice died suddenly in 1948 it was up to his son Carlo Felice, known as “Cici”, to save the business. Cici did so in no uncertain terms, when he presented his 1/10-scale model of the distinctive Barchetta to prospective client Enzo Ferrari. Enzo accepted the “little boat” design as presented. The superleggera concept became so closely associated with Touring that it was incorporated into the name of the company, becoming Touring Superleggera Milano in the 1950s.

Pictured: Cici Anderloni proudly displays the original Barchetta model to Paul Russell. Lake Como, 1998.

For many years, conventional wisdom had it that there were 3 Atlantics built. Fortunately enthusiasts like L.G. Matthews and historians like Pierre-Yves Laugier continue to study all things Bugatti, and new information and analysis becomes known and shared. The revival of the Bugatti Marque in the ownership of the Volkswagen Group has facilitated a reorganization of the company historic archives, in the hands of the esteemed Julius Kruta.

It is now acknowledged that there was a prototype (pictured here) named the Aerolithe built on a modified T57 chassis and later disassembled to form the basis for the first production car, now on the S chassis number 57374. This first car was labeled the Aero, and resides at the Mullin Automotive Museum.

Chassis 57473 was the second car produced and the first to be called the Atlantic. There were two more Atlantics made, one of which has not been seen since it disappeared in Belgium in the 1940s. The last of the Atlantics produced is chassis number 57591.

In March of 1926, Felice Bianchi Anderloni founded Carrozzeria Touring in Milan, Italy. A “gentleman” race driver and coachbuilder for 1930s Isotta-Fraschini and Alfa Romeo, Felice was well respected for creating beautiful, aerodynamic designs. He developed the patented “superlight” Superleggera construction method, a marvel of metal tube frames welded to a solid chassis, then skinned with aluminum body panels.

When Felice died suddenly in 1948 it was up to his son Carlo Felice, known as “Cici”, to save the business. Cici did so in no uncertain terms, when he presented his 1/10-scale model of the distinctive Barchetta to prospective client Enzo Ferrari. Enzo accepted the “little boat” design as presented. The superleggera concept became so closely associated with Touring that it was incorporated into the name of the company, becoming Touring Superleggera Milano in the 1950s.

Pictured: Cici Anderloni proudly displays the original Barchetta model to Paul Russell. Lake Como, 1998.

Born into an Italian banking family, Count Carlo Felice Trossi was an amateur inventor and a noted motor sportsman of the 1930s. Known as ‘Didi’ to his friends, he enjoyed racing boats and airplanes in addition to his pursuits in the field of engineering. As an early financial backer of Enzo Ferrari, he become President of Scuderia Ferrari in 1932 while continuing to be a primary driver for the team.

Reproduced here is a picture dated 1932, and supplied by his family, of his SSK in front of Castello di Gaglianico. The records of the Automobile Club of Italy show that Count Trossi sold and bought back this singular car several times from 1931 until his death in 1949.